News

    Prothom-Alo
    EProthom-Alo
    Bdnews24
    Jugantor
    Ittefaq
    Kaler Kantho
    Amadersomoy
    Samakal
    AmardeshOnline
    Bhorerkagoj
    Nayadiganta
    Jaijaidin
    Janakantha
    Dainik Destiny
    ManabZamin
    Inqilab
    Sangbad
    AnandaBazar
    Sangram
    Dinkal
    BBC Bengali
    VOA Bangla

 First   Provious   1   2   3   Next   Last

Install Windows 2008 DHCP Server

DHCP: Dynamic Host Configuration Protocol is a core infrastructure service on any network that provides IP addressing and DNS server information to PC clients and any other device. DHCP is used so that you do not have to statically assign IP addresses to every device on your network and manage the issues that static IP addressing can create. More and more, DHCP is being expanded to fit into new network services like the Windows Health Service and Network Access Protection (NAP). However, before you can use it for more advanced services, you need to first install it and configure the basics. Let’s learn how to do that.

Installing Windows Server 2008 DCHP Server is easy. DHCP Server is now a “role” of Windows Server 2008 – not a windows component as it was in the past.

To do this, you will need a Windows Server 2008 system already installed and configured with a static IP address. You will need to know your network’s IP address range, the range of IP addresses you will want to hand out to your PC clients, your DNS server IP addresses, and your default gateway. Additionally, you will want to have a plan for all subnets involved, what scopes you will want to define, and what exclusions you will want to create.
To start the DHCP installation process, click Add Roles from the Initial Configuration Tasks window or from Server Manager click Roles click Add Roles.

Image 1: Adding a new Role in Windows Server 2008

When the Add Roles Wizard comes up, you can click Next on that screen.
Next, select that you want to add the DHCP Server Role, and click Next.

Image 2: Selecting the DHCP Server Role
If you do not have a static IP address assigned on your server, you will get a warning that you should not install DHCP with a dynamic IP address.
At this point, you will begin being prompted for IP network information, scope information, and DNS information. If you only want to install DHCP server with no configured scopes or settings, you can just click Next through these questions and proceed with the installation.

 First   Provious   1   2   3   Next   Last

NEW POST

BANGLADESH